Copying may not be performed correctly depending on the conditions. You can leave a response , or trackback from your own site. Environment Settings 2 Environment Settings This chapter describes the machine’s operating environment. To connect the Ethernet interface: If the jammed paper cannot be removed, pull out the tray. Prepare a new toner cartridge.

Uploader: Mazushura
Date Added: 16 May 2016
File Size: 15.38 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5462
Price: Free* [*Free Regsitration Required]

The data saved in the hard disk of the machine may be lost if there is any problem in the hard disk. You can activate the following ports: The entered value appears in the status machine diagram.


Environment Settings 2 Environment Settings This chapter describes the machine’s operating environment. Load the paper with the side to copy or print on facing up. Align the leading edge of the paper with the left side of the tray.

If the jammed paper cannot be removed, pull out the tray. To print the manual completely, please, download it. Tech bytes for tea?

Fuji Xerox DocuCentre S Toner

Conventions Using This Guide Conventions The screen shots and illustrations used in this guide vary depending on the machine configuration and optional components installed. Page – E Select [Print] from the application’s [File] menu. Symptom Remedy Unable to connect to Is the machine operating normally? Toner Cartridge This icon is lit when the toner cartridge needs to be replaced in the near future.


Select [Every visit to the page] or [Every time you start Internet Explorer]. Paper Supply Sets the tray to use. System Settings Procedure 8 Tools System Settings Procedure This section describes the overview of how to change the machine’s default settings and check the machine vocucentre.

DocuCentre S2010 How To, FAQ & Answers

Do not display Error Display of You can set the password and s210 number of copied impressions permitted for each user. Use paper recommended by Fuji Xerox. Scanning using a network is not supported.

First Copy Output Time Document glass: Make sure that the document is not torn, wrinkled, or folded, and then reload the documents that have not been copied or scanned. For more information, refer to “Feature Settings” Complete the following operations. Refer to “Power Source” P. Original Size 5 Copy Aut Automatic zoom ratio The machine automatically sets an appropriate zoom ratio by calculating the document size and the specified paper size to enable the document to fit on the page.


Paper Jams in Tray 2″ P.

Edits the IPv6 address that is allowed from access. Cleaning Document Presser And Narrow Glass Strip Cleaning the Machine Wipe the document cover with a soft cloth moistened with water to remove any dirt, and then wipe it with a soft, dry cloth.

DocuCentre S2010 Drivers & Downloads

When the print job is completed, the status machine diagram displays as shown in the right image. Default setting Binding side for Set the binding side when the 3: You can set the erase frame in the System Administration mode.

To get the most out of the machine and to use it effectively, be sure to read this guide before use. Operations during Copying Operations during Copying You can stop the currently copying job. Is the paper loaded Load the paper correctly.